Fast, Reliable Wall Insulation Across Enterprise
If your Enterprise home feels hot the moment the sun hits the west wall, the insulation inside that wall is probably the reason. We work on wall insulation in Enterprise, NV every week, and most of what we find in this part of the valley is builder-grade material installed fast during the housing boom, not old insulation that has worn out. Call (888) 751-6515 and a live person picks up, day or night. We know the 89139 subdivisions, we know how these tract homes were built, and we know where the gaps hide.

Why Walt’s Insulation Sunrise Manor Is Enterprise’s Preferred Wall Insulation Company
We’re the one down the road, not an 800 number in another state. Every call is answered by a real person, 24/7, and every technician who shows up at your door is background-checked and uniformed, so you know exactly who is walking through your house. All work is backed by our Done Right Promise: if it isn’t done right, we make it right, no runaround.
Enterprise homeowners call us because the last crew left them guessing. We give you a written estimate up front, a free second opinion on any estimate you’ve already received, no trip charge inside the service county, and a standing 10% discount for seniors and veterans. Our technicians have up to 26 years of experience, which matters in a market full of production housing where the fix is rarely obvious from the street. We’re locally owned and owner-operated, with a published address and license number, so there’s someone to call back.
Our Wall Insulation Services in Enterprise
Wall insulation in Enterprise is mostly correction work, not replacement. Here’s how we approach the four jobs we run most often in this part of the valley.
Injection Foam Wall Insulation
Injection foam fills the voids that batt insulation never reached, the pockets around outlets, switches, and HVAC chases in stucco-on-frame walls. On Enterprise’s west- and south-facing walls, where summer solar gain pushes the surface temperature well past the air temperature, those voids turn into hot spots you can feel from inside. We use foam products from Icynene and Demilec for this work, and it goes in without tearing up your drywall.
Drill & Fill Wall Insulation
Drill and fill is the standard retrofit for finished walls: small holes from the exterior, loose-fill or foam blown into the cavity, then the stucco patched. It’s a good match for the 1990s-2010s tract homes that make up most of Enterprise because the wall cavities are uniform and easy to reach from outside. No interior demolition, no repainting, and the wall performs the way it should have from the start.
Exterior Wall Insulation
When a wall cavity is empty or the sheathing is thin, exterior wall insulation adds a continuous layer that stops heat before it reaches the framing. In Enterprise, where attics routinely hit 140°F+ and design-day temperatures run 105-110°F, that continuous layer is the difference between a workable electric bill and a runaway one. We use Knauf and CertainTeed products for these builds, sized to the wall assembly and the exposure.
Interior Wall Soundproofing
Soundproofing interior walls is the quieter half of the business, and it comes up often in two-story Enterprise homes where bedrooms share walls or a home office sits next to the laundry. We use dense Rockwool batts in the cavities, seal the outlets and penetrations, and the noise drops noticeably. Same materials, different goal: keep the sound in one room instead of the heat out of the house.
Trusted Brands We Service in Enterprise
The materials matter as much as the install. We work with Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, and GreenFiber, and we match the product to the wall assembly instead of forcing one brand on every job. We don’t stock parts locally; materials are ordered for your project and arrive on schedule, which keeps turnaround fast and avoids the “we’ll come back when the truck’s loaded” routine. If you have a brand preference or a spec from a builder, tell us and we’ll work with it.

Common Wall Insulation Problems We See in Enterprise Homes
Wall insulation in Enterprise is less about retrofitting old homes and more about fixing what production builders left behind. Here’s the short list of what we find on 89139 jobs.
- Gaps at outlets, switches, and HVAC chases in stucco-on-frame walls. Builder-grade batts were installed fast, and the small penetrations were rarely sealed. In a climate where west- and south-facing walls soak up intense solar gain, those gaps are where the heat gets in.
- Batts compressed or blown aside in shallow attic sections. HVAC installers working in the low-clearance areas over garages and secondary bedrooms routinely displaced the insulation. The result is bare drywall in a space that hits 140°F+ in July.
- Missing or damaged top-plate sealing and knee-wall baffles. Without those details, hot attic air convects down into the wall cavities. It shows up as hot interior walls in summer and cold drafts in winter, when Enterprise winds pick up and temperatures drop near freezing.
- Walls that meet code but not the climate. Minimum code was written for a national average, not for Enterprise’s 105-110°F design day. A wall built to the letter of the code still underperforms here.
Pricing for Wall Insulation in Enterprise, NV
Here’s what wall insulation actually runs in this market. Injection foam for a typical wall assembly in an Enterprise tract home usually lands between $2.50 and $5.00 per square foot, depending on cavity depth and the number of penetrations. Drill and fill runs roughly $2.00 to $4.50 per square foot, and exterior wall insulation with a continuous layer often comes in around $3.00 to $6.00 per square foot. Interior wall soundproofing is usually priced per wall, with most Enterprise jobs in the $600 to $1,800 range. The variables that move those numbers are wall length, access, how many voids need filling, and whether top-plate sealing is included. Estimates are free, and we’ll walk the house with you before we quote.
We Also Serve Cities Near Enterprise
We cover the neighborhoods around Enterprise as well, including Spring Valley, Paradise, Winchester, and Henderson. The housing stock and the heat load are similar throughout the southern Strip, so the approach carries over. If you’re outside Enterprise proper, see our Wall Insulation in Enterprise page for the local overview and give us a call to confirm coverage.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Wall Insulation in Enterprise
Drill-and-fill works well in Enterprise because the wall cavities in these 1990s-2010s tract homes are uniform and easy to reach from outside, so the retrofit doesn’t require tearing up the interior. A crew drills small holes through the stucco, blows in the insulation, and patches the surface. The wall cavity gets filled without interior demolition or repainting, which is why it’s the go-to method for finished walls in 89139. Call (888) 751-6515 for an exact quote on your home, and estimates are free.
Enterprise’s summer heat is the reason the wall details matter here more than in milder climates. Design-day temperatures run 105-110°F, and west- and south-facing walls soak up intense solar exposure for most of the afternoon. Any gap, compressed batt, or unsealed penetration becomes a hot spot you can feel from inside. The right insulation and air sealing keep the heat out, which keeps the electric bill in a range you can live with. Call (888) 751-6515 for a free second opinion on any estimate you’ve already received.
Yes, injection foam is a good fit for the low-clearance attic sections over garages and secondary bedrooms that we see in many Enterprise tract homes. Those spaces are hard to reach and were often disturbed by HVAC installers during construction, so batts got compressed or blown aside and left bare drywall behind. Foam fills the voids without needing to crawl through a shallow space at 140°F. Call (888) 751-6515 to schedule a walk-through, and we’ll tell you what’s reachable and what isn’t.
The brands we work with most often in Enterprise are Knauf, Rockwool, CertainTeed, Icynene, and Demilec, chosen to match the wall assembly and the goal. Dense Rockwool batts make sense for interior soundproofing, while Icynene and Demilec foams are the usual choice for injection work in existing cavities. Knauf and CertainTeed products fit exterior and continuous insulation builds. We don’t stock parts locally; materials are ordered for your project. Call (888) 751-6515 to talk through options for your home, and estimates are free.
The tell usually shows up on your electric bill and on the inside of your exterior walls in July. If west- or south-facing rooms run noticeably hotter than the rest of the house, or if the interior drywall feels warm to the touch in the afternoon, the wall cavity is underperforming. In Enterprise’s newer tract homes, that almost always means builder-grade gaps that were never sealed, not worn-out insulation. A home energy audit will pinpoint it. Call (888) 751-6515 to get started, and our technicians have up to 26 years of experience to draw on.
Wall insulation in Enterprise is a correction job, and the fix is usually simpler than homeowners expect. Whether you need injection foam in a west-facing wall, drill and fill across the whole house, or soundproofing between bedrooms, we’ll walk the property with you and put the price in writing. Our Wall Insulation team handles every job in Enterprise with the same Done Right Promise: if it isn’t done right, we make it right. Call (888) 751-6515 for a free estimate, and a live person will pick up. No voicemail, no call center, no runaround.
Written by the team at Walt’s Insulation Sunrise Manor.